KEI L Relies on Vast Experience To Add HP Services
Originally published: 09.01.10 by HVACR Business Staff
Milton Baum is co-owner of KEIL Heating and Air Conditioning, Riverdale, N.J. which has built an internal HP services program.
Why did you decide to add HP services? Did customers ask for it? Did you see compelling research? Or did you pick up on the trend on your own? KEIL Heating and Air Conditioning has always been at the forefront of change. We have performed complete heat loss/heat gain calculations since the late 1980s. We have had all of our technicians certified in air balancing, and carbon monoxide and combustion analysis. We have NATE-certified technicians, take advantage of manufacturers’ training, and use the Eastern Heating Cooling Council for additional training. HP just seems to be the next logical step in doing what is right for the homeowner. Why is it right for homeowners? With energy costs continuing to rise, and electrical distribution maxed out, the only way for homeowners to control increasing energy costs is to make efficiency changes to their homes. HP is the change most homeowners need. We decided that possessing the knowledge and certifications necessary to assist homeowners in tightening their homes and increasing efficiency of their major appliances was in everyone’s best interest. We feel that as time goes on, the focus on HP will increase, and we want to be a part of that as it is a win-win for everyone involved. What have you had to invest in to add HP service? Our investment to this point has been minimal. We sent three people to take the Building Performance Institute (BPI) training classes for Building Analyst and Envelope (Shell) at a cost of $1,500 per person, including testing. This was scheduled through Conservation Services Group (CSG), which administers the Home Performance with Energy Star program in New Jersey. In order to complete the field-testing and to perform the basic requirements for testing a home, KEIL purchased a Minneapolis blower door, a Minneapolis Duct Blaster system, and a TrueFlow air handler flow meter through CSG for a total equipment cost of just over $5,000. In that our company was enrolled in the CSG program before April 26, 2010, KEIL was eligible for incentives on the BPI training and equipment purchases through the State of New Jersey. These state incentives cut our training and equipment costs roughly in half, from $10,000, down to $5,000 Beyond the certifications for Building Analyst and Envelope (Shell), KEIL will have to incur costs of certifying at least two people for Heating and for Air Conditioning through BPI as those incentives through the State of New Jersey have been eliminated. Each of these classes costs $750 per person. Beyond the costs of classroom training and acquiring the tools, there is also the ongoing cost of continuing education to keep each of the BPI certifications current. This includes travel, food and lodging expenses, plus the costs of the seminars themselves. Add in the cost of an infrared camera with a week’s worth of out-of-state training, and you can add on another $9,000 to $15,000. Before long, we will have invested between $20,000 and $30,000 to be proficient in the Home Performance field, and this is without purchasing any type of insulation equipment. What are your goals in terms of revenue generation or percentage of business? We created a DBA (Doing Business As) — KEIL Home Energy Solutions — to perform all of the Home Performance work through. Once we have completed all of the training and received all of the certifications, we plan to market HP as a new service offered through KEIL Heating and Air Conditioning. Our goals for revenue are somewhat tied to the New Jersey state incentives. When we first entered the Home Performance with Energy Star program, the homeowner incentives were capped at 50% of the total cost up to $10,000, plus zero-interest financing for the additional costs. Since the time we started our training, the state’s program has been suspended and then reinstated with incentives capped at 50% of the total cost up to $3,000, plus the zero-interest financing. With these new changes in the state’s program, there will be far fewer homeowners interested in participating. KEIL has never been the type of company to put all of its eggs in one basket, so once we are fully certified, we will begin the program slowly and build it up based on demand. We fully believe in HP as the future of our industry, which is why we moved ahead with the training in the first place. But we will never put ourselves in a position where should the homeowner incentives go away again, it could hurt our business. Why did you choose not to go the franchise route? With over 100 years of experience in the residential hvac industry, we feel that our in-house systems are strong enough to format a HP services system that will work well for our customers and us at a fraction of the cost of a franchise.
Articles by HVACR Business Staff
10 Steps to Setting Up a Payroll System
The Small Business Administration’s guide to payroll, tax and benefit withholding, and reporting.
5 Technologies That Cut Costs, Boost Profits
Move to the cloud, get paid faster, go mobile, begin barcoding or get control of your fleet with GPS.